Liebherr’s
Our Liebherr handlers are designed to promote faster cycles and greater handling capacities. The fleet ranges from LH 30 to LH 110 Machines.
Our most commonly used model is the LH60, fitted with tier 4 engine, this material handling machine is equipped with the patented Liebherr ERC System (energy recovery system), that gives a boost in terms of performance, quietness in operation and also saves fuel.
Port Handling Mobile Units
Scania R730 and Volvo FH 16 8 wheeled chassis, fitted with our patented JST LIEBHERR/ DOLL transport system.
Attachments
JST Services operate a range of 80 specialised Port Handling attachments. From timber grabs to magnetic spreader bars, both this fleet and the expertise in operation of it has been built up to enable JST to handle a wide range of materials. We also design and fabricate
specialist grabs (such as RDF bale clamps) for our own use and for resale/hire.
Timber Haulage Trucks
The fleet consists of Articulated trucks in both 6×4 and 6×2 configuration and rigid truck and trailer configuration, all trucks are fitted with Central Tyre Inflation and electric wire watchers as standard.
The fleet are fitted with the latest telematic systems which gives tracking and vehicle performance live, this is a great advantage to our traffic planning department.
Independent loaders
Volvo 8×6 fitted with Jonsered 2990 crane or Epsilon S260, they have 15.5 meters reach. They are all fitted with heavy duty jack legs with large pads that can raise the unit up by 1 meter and lower the ground pressure to eliminate ground damage.
In forest Low Ground Pressure unit
Volvo FMX Globetrotter, 8×6 unit 540hp with power tronic gearbox.
Connected to a turn table draw bar trailer (JST Services has design rights) that is fitted with
heavy duty suspension and rear independent axles. All axles are in a staggered configuration to cover all the road surface when traveling in the forest, this along with CTI fitment help keep the forest roads in top condition and also provides a very low ground
pressure when loaded.
Floating Pier Systems
The JST Services integrated floating pier system – is designed to move resources in and out of remote locations.
The piers are patented unique pieces of self-assembling marine equipment that provide a key temporary interface and stable platform, facilitating vessels of up to 3000 tonne capacity to berth alongside and load or discharge specific resources.
Internal Shunters
8×4 rigid, I shift gearbox
Fitted with heavy duty body’s with wide timber bunks to maximise loading cycle times
Commercial Sleeper Vans
JST Services run a fleet of professionally converted mid-sized vans, which provide accommodation and welfare facilities for our operators whilst working away from base. These vehicles also carry essentials such as Oil spill / First aid kits and operational supplies.